Sony SLV-K867MN/PS Operating Instruction Download Page 69

Page: 69 / 84

Additional Information

Symptom

A tape cannot be inserted.

The remote commander does
not function.

The tracking indicator does not
appear on the screen.

The VCR needs to be cleaned.

The AMS function does not
work properly.

Remedy

• Check that a tape isn’t already in the tape

compartment.

• Make sure you are pointing the remote commander

at the remote sensor on the VCR.

• Replace all the batteries in the remote commander

with new ones if they are weak.

• Make sure the TV / VIDEO remote control switch

is set correctly.

• The recording condition of the tape is very poor

and tracking cannot be adjusted, or the NTSC
system is being used.

• Clean the cabinet, panel and controls with a dry,

soft cloth, or a soft cloth slightly moistened with a
mild detergent solution. Do not use any type of
solvent, such as alcohol or benzine.

• The tape has too many blank spaces in a short time

span. Change PROGRAM MODE in the SET UP
KARAOKE menu from AMS to INDEX.

Others

Summary of Contents for SLV-K867MN/PS





















































































Search results

Summary of Contents for SLV-K867MN/PS

Reviews:

Related manuals for SLV-K867MN/PS

Brands by name

Popular brands

Sony SLV-K867MN/PS, Operating Instruction

Search results

Summary of Contents for SLV-K867MN/PS

Reviews:

Related manuals for SLV-K867MN/PS

Brands by name

Popular brands