manualshive.com logo in svg

Sony SLV-K867MN/PS, Operating Instruction, Page: 64 / 84

Share
Download
Sony SLV-K867MN/PS Operating Instruction Download Page 64

66

Editing

To listen to both the hi-fi and normal audio

Set AUDIO MIX to ON in the SET UP MENU (page 61).  Use this feature to
listen to dubbed audio over the original hi-fi audio.  When AUDIO MIX is
set to ON, the AUDIO MONITOR button does not function.  Remember to
reset AUDIO MIX to OFF after playing the tape.

AUDIO DUB

P

 PAUSE

Audio dubbing

This feature lets you record over the
normal audio track.  The monaural
sound previously recorded is replaced
while the original hi-fi sound remains
unchanged.  Use this feature to add
commentary to a tape that you have
recorded with a camcorder.  You can also
record your karaoke performances.

Audio dubbing from a
stereo system or other
external source

Before you start dubbing

• Turn on your TV and set it to the video channel.
• Press INPUT SELECT to display “L2” in the display window.

1

Insert a source tape into the stereo system (or the playback VCR).
Search for the point to start playback and set it to playback pause.

2

Insert a prerecorded tape into this (recording) VCR. Search for the end
of the section to be replaced and press 

P

 PAUSE.

Make sure that the tape has its safety tab in place.

3

Press COUNTER RESET on this VCR to reset the counter to
“0H00M00S.”

4

Rewind the prerecorded tape to the beginning of the section to be
replaced.

The VCR pauses.

5

Press AUDIO DUB.

The audio dubbing indicator   appears in the display window.

6

To start editing, press the 

P

 PAUSE buttons on this VCR and the stereo

system (or other VCR) at the same time.

When the counter reaches “0H00M00S,” audio dubbing stops
automatically.

To stop while recording

Press the 

p

 STOP buttons on this VCR and the stereo system (or other VCR).

4

5

6

7

8

9

0

COUNTER
RESET

Summary of Contents for SLV-K867MN/PS





















































































Reviews:

No comments