Sony SLV-K867MN/PS Operating Instruction Download Page 65

Page: 65 / 84

Editing

Audio dubbing from the microphone

Using the microphone, you can add songs or narration on a recorded
tape. Sound from the microphone is mixed with the original hi-fi sound
and recorded on the normal audio track.

Before you start dubbing

• Connect the microphone(s) to the MIC IN 1 and/or 2 jack(s), and turn

on the microphone(s).

COUNTER
RESET

AUDIO DUB

PAUSE

KARAOKE ON/OFF

Microphone

MIC IN 1/2

Set KARAOKE ON/OFF to ON.

Insert the prerecorded tape into the VCR. Search for the end of the
section to be replaced and press

PAUSE.

Make sure that the tape has its safety tab in place.

Press COUNTER RESET to reset the counter to “0H00M00S.”

Rewind the prerecorded tape to the beginning of the section to be
replaced.

The VCR pauses.

Press AUDIO DUB.

The audio dubbing indicator appears in the display window.

To start editing, press

PAUSE to start dubbing and sing or speak into

the microphone.

When the counter reaches “0H00M00S,” audio dubbing stops
automatically.

continued

To listen to the dubbed sound (normal audio)

Press AUDIO MONITOR until the “L,” “R,” and “STEREO” indicators go off
in the display window.

Summary of Contents for SLV-K867MN/PS





















































































Search results

Summary of Contents for SLV-K867MN/PS

Reviews:

Related manuals for SLV-K867MN/PS

Brands by name

Popular brands

Sony SLV-K867MN/PS, Operating Instruction

Search results

Summary of Contents for SLV-K867MN/PS

Reviews:

Related manuals for SLV-K867MN/PS

Brands by name

Popular brands