Sony SLV-ED70MN Operating Instructions Manual Download Page 48

Page: 48 / 55

Additional Information

SLV-ED70MN (E) 3-865-382-11 (1)

Troubleshooting

Symptom

The ON/STANDBY switch
does not function.

The power is turned on but the

VCR does not operate.

The clock has stopped and

“–:– –” lights in the display

window.

The playback picture does not

appear on the TV screen.

The playback picture has no

colour or unusual colours.

The picture is not clear.

The picture rolls vertically

during picture search.

The picture has no sound.

The sound is unstable or has an

echo.

Additional Information

If you have any questions or problems not covered below, please consult your
nearest Sony service facility.

Power

Clock

Remedy

• Connect the mains lead to mains securely.

• Moisture condensation occurs. Turn the power off,

unplug the mains lead and leave the VCR to dry for

over one hour.

• The clock stops if the VCR is disconnected from the

mains for more than eight hours. Reset the clock (and

timer).

• Make sure the TV is set to the video channel. If you are

using a monitor, set it to video input.

• Set the PAL/MESECAM option in the SET UP MENU

according to your local colour system.

• Adjust the tracking with the TR/– buttons.
• Make sure the colour system is set to the system that

the tape was recorded in.

• The video heads are dirty (page 50). Clean the video

heads using the Sony T-25CLD, T-25CLW or E-25CLDR

video head cleaning cassette. If these cleaning cassettes

are not available in your area, have the heads cleaned

at your nearest Sony service facility (a standard service

charge will be required). Do not use a commercially

available liquid type cleaning cassette other than

Sony’s, as they may damage the video heads.

• The video heads may have to be replaced. Consult

your local Sony service facility for more information.

• Adjust the vertical hold control on the TV or monitor.

• The tape is defective.
• If you made A/V connections, check the audio cable

connection.

• When you play a tape with the same sound recorded

on both the hi-fi and normal sound tracks, make sure

the AUDIO MIX option in the SET UP MENU is set to

OFF.

Playback

7/48-54_SLV-ED70MN.12E

1/17/01, 2:32 PM

Summary of Contents for SLV-ED70MN
























































Search results

Summary of Contents for SLV-ED70MN

Reviews:

Related manuals for SLV-ED70MN

Brands by name

Popular brands

Sony SLV-ED70MN, Operating Instructions Manual

Search results

Summary of Contents for SLV-ED70MN

Reviews:

Related manuals for SLV-ED70MN

Brands by name

Popular brands