Editing
47
SLV-ED70MN (E) 3-865-382-11(1)
1
2
3
4
5
6
Audio dubbing
This feature lets you record over the
normal audio track. The monaural
sound previously recorded is placed
while the original hi-fi sound remains
unchanged. Use this feature to add
commentary to a tape that you have
recorded with a camcorder.
Before you start editing
• Turn on your TV and set it to the
video channel.
• Press INPUT SELECT or PROG +/– to
display “L1” or “L2” or “L3” in the
display window.
1
Insert a source tape into the stereo system (or the playback VCR).
Search for the point to start playback and set it to playback pause.
2
Insert a prerecorded tape into this (recording) VCR. Search for the end
of the section to be replaced and press
P
PAUSE.
Make sure that the tape has its safety tab in place.
3
Press COUNTER RESET on this remote commander to reset the counter
to “0:00:00.”
4
Rewind the prerecorded tape to the beginning of the section to be
replaced.
The VCR pauses.
5
Press AUDIO DUB.
The indicator appears in the display window.
6
To start editing, press the
P
PAUSE buttons on this VCR and the stereo
system (or other VCR) at the same time.
When the counter reaches “0:00:00” audio dubbing stops automatically.
To stop while editing
Press the
p
STOP buttons on this VCR and the stereo system (or other VCR).
To listen to both the hi-fi and normal audio
Set AUDIO MIX to ON in the SET UP MENU (page 44). Use this feature to
listen to dubbed audio over the original hi-fi audio. When AUDIO MIX is set
to ON, the AUDIO MONITOR button does not function. Remember to reset
AUDIO MIX to OFF after playing the tape.
COUNTER
RESET
AUDIO DUB
P
PAUSE
6/45-47_SLV-ED70MN.12E
1/17/01, 2:31 PM
47
