Sony SLV-E580EG Operating Instructions Manual Download Page 37

Page: 37 / 72

Basic Operations

Basic Operations

Tips

• To select a programme position, you can use the programme number buttons on the

remote commander. For two-digit numbers, press the

(ten’s digit) button

followed by the programme number buttons.

• You can select a video source from the LINE-1 (TV), LINE-3 IN (Scart) connector, or

LINE 2 IN VIDEO/AUDIO jacks using INPUT SELECT.

• The display appears on the TV screen indicating information about the tape, but the

information won’t be recorded on the tape.

• If you don’t want to watch TV while recording, you can turn off the TV.

When using a decoder, make sure to leave it on.

Notes

• The display does not appear during still (pause) mode or slow-motion playback.
• The display will not appear while playing an NTSC-recorded tape.
• If a tape has portions recorded in both PAL and NTSC systems, the time counter

reading will not be correct. This discrepancy is due to the difference between the
counting cycles of the two video systems.

• You cannot watch a Canal Plus programme while recording another Canal Plus

programme.

• When you insert a non-standard commercially available tape, the remaining time

may not be correct.

• The remaining time doesn’t work for an NTSC-recorded tape. “–H– –M” appears in

the display window.

• The remaining time is intended for rough measurement only.
• About 30 seconds after the tape begins playback, the tape remaining time will be

displayed.

Summary of Contents for SLV-E580EG









































































Search results

Summary of Contents for SLV-E580EG

Reviews:

Related manuals for SLV-E580EG

Brands by name

Popular brands

Sony SLV-E580EG, Operating Instructions Manual

Search results

Summary of Contents for SLV-E580EG

Reviews:

Related manuals for SLV-E580EG

Brands by name

Popular brands