background image

41

Additional Operations

Adjusting the picture

Adjusting the tracking

Although the VCR automatically adjusts the tracking when playing a tape
(the 

 indicator flashes in the display window, then goes off), distortion

may occur if the tape was recorded in poor condition.  In this case, manually
adjust the tracking.

Press the TR/– buttons on the VCR to
display the tracking meter.  The distortion should
disappear as you press one of the two buttons (the

 indicator lights up).  To resume automatic

tracking adjustment, eject the tape and reinsert it.

About Adaptive Picture Control (APC)

Adaptive Picture Control (APC) automatically improves recording and
playback quality by adjusting the VCR to the condition of the video heads
and tape.  To maintain better picture quality, we recommend that you set
APC to ON in the ADVANCED OPTIONS menu (with the APC indicator in
the display window lit).

APC playback

The APC function automatically works on all types of tapes, including rental
tapes and tapes that were not recorded with APC.

APC recording

Whenever you insert a tape and start recording at the first time, the VCR
adjusts to the tape using the APC function (the APC indicator flashes
rapidly).  This adjustment is retained until the tape is ejected.

Notes

• The auto tracking adjustment cannot be guaranteed to work with tapes recorded in

LP mode on other VCRs.

• With the Auto Tape Speed function on, the APC function does not work if the tape

speed is automatically changed from the SP to EP mode during a timer recording,
unless the tape has been recorded in the EP mode with the APC function.  For
details, see page 42.

• There is a delay of a few seconds before the VCR actually starts recording while the

VCR analyzes the tape.  To avoid the delay, first set the VCR to recording pause (the
APC indicator flashes slowly) and press 

r

 REC to have the VCR analyze the tape.

After the APC indicator stops flashing, press 

P

 PAUSE to start recording

immediately.  If you press 

P

 PAUSE before the APC indicator stops flashing, the

APC function is canceled.

Tracking meter

NORMAL TRACKING

Summary of Contents for SLV-469

























































Reviews: