![background image](http://html.mh-extra.com/html/sony/shake-100d/shake-100d_operating-instructions-manual_1330189042.webp)
42
GB
6
Perform the
Bluetooth
connection on the
Bluetooth
device.
When pairing is completed and the
Bluetooth
connection is established,
the
Bluetooth
device name appears in
the display panel.
Depending on the
Bluetooth
device,
connection may start automatically
after pairing is completed.
You can check the
Bluetooth
device
address by pressing DISPLAY
repeatedly.
Notes
• You can pair up to 9
Bluetooth
devices. If the
10th
Bluetooth
device is paired, the oldest
paired device will be deleted.
• “Passkey” may be called “Passcode”, “PIN
code”, “PIN number”, or “Password”, etc.,
depending on the device.
• The pairing standby status of the system is
canceled after about 5 minutes. If pairing is
not successful, repeat from step 1.
• If you want to pair with another
Bluetooth
device, repeat steps 1 to 6.
To cancel pairing operation
Hold down BLUETOOTH on the unit for
2 seconds or more until “BLUETOOTH”
appears in the display panel.
You can operate a
Bluetooth
device by
connecting the system and the
Bluetooth
device using AVRCP.
Check the following before playing
music:
– The
Bluetooth
function of the
Bluetooth
device is turned on.
– Pairing has been completed.
1
Press BLUETOOTH on the unit
to select
Bluetooth
function.
“BLUETOOTH” appears in the
display panel.
2
Establish connection with the
Bluetooth
device.
Press BLUETOOTH on the unit to
connect to the last connected
Bluetooth
device.
Perform the
Bluetooth
connection
from the
Bluetooth
device if the device
is not connected.
Once the connection is established, the
Bluetooth
device name appears in the
display panel.
3
Press
N
to start playback.
Depending on the
Bluetooth
device,
– you may have to press
N
twice.
– you may need to start playing an
audio source on the
Bluetooth
device.
Notes
• When the system is not connected to any
Bluetooth
device, the system will connect to
the last connected
Bluetooth
device
automatically when you press
N
.
• If you try to connect another
Bluetooth
device
to the system, the current connected
Bluetooth
device will be disconnected.
To disconnect the
Bluetooth
device
Press BLUETOOTH on the unit.
“BLUETOOTH” appears in the display
panel.
Depending on the
Bluetooth
device, the
Bluetooth
connection may be canceled
automatically when you stop playback.
Use the buttons on the unit to perform this
operation.
1
Press BLUETOOTH to select
Bluetooth
function.
“BLUETOOTH” appears in the
display panel.
Playing music from a
Bluetooth
device
Erasing all the pairing
registration information