6
Part Name and Functions
Front panel
EJECT
POWER
BUSY
TAPE
STATUS
1
2
3
4
5
6
1
Data Cartridge Receptacle
Insert an AIT data cartridge here. See page 12 for information on
inserting and removing data cartridges.
2
EJECT Button
Push to remove a data cartridge from the drive.
3
STATUS Indicator
Lights when an inserted cartridge is write-protected. This indicator also
lights under the following conditions:
Part 1
Introduction
Drive needs cleaning
repeated long-on, short-off blinking.
End of Tape during cleaning
repeated blinking (same on-off
interval).
Drive Malfunctioning
repeated short-on (once or twice),
long-off blinking.
4
TAPE Indicator
When a AIT cartridge is installed, this indicator lights. This also lights
under the following conditions:
Inserting and removing a
cartridge
repeated blinking (same on-off
interval)
alternating long-short blinking
Cartridge deteriorated
