manualshive.com logo in svg

Sony SAL-135F28 - 135mm f/2.8 STF Telephoto Lens, Service Manual

Share
Download
Sony SAL-135F28 - 135mm f/2.8 STF Telephoto Lens Service Manual Download Page 35

HELP

SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)

HELP32

Anti-diffusion agent (A-20): J-6082-611-A

Adhesive bond (B-10):

J-6082-612-A

1.

Attach the G6 hold ring washer.

2.

Apply the adhesive bond (B-10) in the width of 5 mm to the two instruction portions of the G6 hold ring washer as shown in the figure.

3.

Apply the anti-diffusion agent (A-20) to the instruction portion of the 2 group front frame block as shown in the figure.

HELP33

Adhesive bond (B-10): J-6082-612-A

1.

Attach the G7 hold ring washer.

2.

Apply the adhesive bond (B-10) in the width of 5 mm to the two instruction portions of the G7 hold ring washer as shown in the figure.

HELP34

Adhesive bond (B-10): J-6082-612-A

1.

Attach the G8 stopper.

2.

Apply the adhesive bond (B-10) in the width of 5 mm to the two instruction portions of the G8 stopper as shown in the figure.

Apply the adhesive Bond 
(B-10) (Two areas)

G6 Hold Ring Washer

Apply the anti-diffusion agent
(A-20)

2 Group Front Frame Block

G7 Hold Ring Washer

Apply the Adhesive Bond 
(B-10) (Two areas)

G8 Stopper

Apply the Adhesive Bond 
(B-10) (Two areas)

Summary of Contents for SAL-135F28 - 135mm f/2.8 STF Telephoto Lens

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands