14
Chapter 1 Introduction
SAITe1300-F
A
RS-232C Connector
For service use only. You do not normally need to use this connector.
B
Cooling Fan and Ventilation Holes
Be careful not to block the ventilation holes. If you do, the unit may overheat,
resulting in damage.
C
AC IN Connector
Connect the power cable appropriate for your country to this connector.
D
Ventilation Holes
Be careful not to block the ventilation holes. If you do, the drive in the unit may
overheat, resulting in damage.
E
FC Status Indicator
When the fibre channel connection is normal, the indicator is off. When the unit
is communicating with the host computer, this indicator lights green. When
there is a connection error, the indicator lights orange. In this case, reconnect the
cable or change it if necessary.
F
Loop ID Jumpers
These jumpers are functional when the topology is arbitrated loop. For details,
see “Setting the Loop ID (SAITe1300-F only)” on page 23.
G
Fibre Channel Connector
Connect the optical fiber cable for Fibre Channel. For details about connection,
see “Connecting the Optical Fiber Cable for Fibre Channel (SAITe1300-F
only)” on page 29.
1
2
3
4
6 5
7
