Sony SA-NS310, Operating Instructions Manual

Page: 15 / 44

15 GB
Ne
two
rk Co
n
n
e
c
tio
n
s
2
Turn the unit on.
You can operate this unit when the ? / 1
(ON/Standby) indicator lights up in green
and the illumination indicator lights up. It
may take a while.
Note
Make sure the AUDIO IN indicator is not lit.
3
Press the WPS button on the
access point.
* The position and the shape of the WPS button
are different depending on the model of the
access point.
Tip
Refer to the operating instructions of your
wireless LAN router/access point for details on
the WPS button.
4
Press the WPS button on the
unit for three seconds.
The LINK indicator lights up in green
when the connection is made.
Note
Before starting this procedure, be aware that your
Wi-Fi network will not be protected until the setting
is complete. After the setting is complete, your
Wi-Fi network will be protected again when you set
a wireless LAN security.
1
Have your wireless network
name (SSID) and Security Key
(if applicable) available for
reference.
Refer to the operating instructions of the
wireless LAN router/access point.
2
Turn the unit on.
3
Press and hold the ALL RESET
button on the bottom of the unit
with a thin object such as a
small pin until the
? / 1 indicator
starts flashing.
4
Check that the ? / 1 (ON/
Standby) indicator changes
from flashing in green to lit in
green.
5
Connect the unit and a Mac or
PC.
For Mac OS X
Turn on Mac.
Click
icon on the top of the screen.
Turn on the Wi-Fi or AirPort. Then select
[Open Network Preferences…].
Select [Sony_Wireless_Audio_Setup]
from the network list.
For Windows 7
Turn on PC.
Click
icon on the bottom of the
screen.
Select [Sony_Wireless_Audio_Setup]
from the network list.
For Windows Vista
Turn on PC.
Click
icon on the bottom of the
screen.
Click [Connect to a network].
Select [Sony_Wireless_Audio_Setup]
from the network list.
Option 3-1: Manual setting
method using an Access Point
Scan (for PC/Mac)
WPS button *
SSID (Wireless Network Name)
Security Key (WEP or WPA key)