14
GB
How to Connect Your
Network
Set up the network after checking your
network environment. Refer to the following
descriptions.
Setting Up for a Wireless
Network
• Option 1: Method for using a supplied CD-
ROM and Windows PC (page 14)
• Option 2: Method for using a WPS push
button at the access point supporting WPS
(page 14)
• Option 3-1: Manual setting method using an
Access Point Scan (for PC/Mac) (page 15)
• Option 3-2: Manual setting method using an
Access Point Scan (for Android device)
(page 17)
• Option 3-3: Manual setting method using an
Access Point Scan (for iPhone/iPad/iPod
touch) (page 18)
Setting Up for a Wired Network
• Option 4: DHCP method (page 19)
Tip
About connecting the fixed IP address and
setting of the proxy server, display the Setting
Screen on a browser and set these referring to
”Option 3-1:Manual setting method using an
Access Point Scan (for PC/Mac)” (page 15).
When a problem occurs while
you are making the network
settings
Press ALL RESET button on the bottom of the
unit with a pointed object (such as a small pin)
(page 10).
Setting Up for a Wireless
Network
Note
Before operation, write down the SSID (Wireless
Network Name) and Security Key (WEP or WPA
key) of your wireless network.
1
Connect the AC adaptor to the
unit.
Check that the
?
/
1
(ON/Standby)
indicator changes from flashing in green
to lit in green.
2
Load the supplied CD-ROM into
the CD-ROM drive of your PC.
3
Follow the instructions that
appear on the display.
1
Check whether the network
(LAN) cable (not supplied) is
disconnected.
Disconnect the network (LAN) cable
while the AC power is disconnected if the
network (LAN) cable is connected.
Network Connections
Option 1: Method for using a
supplied CD-ROM and Windows
PC
Option 2: Method for using a
WPS push button at the access
point supporting WPS
CD-ROM
