1-17E
74
Troubleshooting
Tim
er rec
o
rd
ing
The PDC function does
not operate properly.
• Check that the clock and the date are set correctly.
• Check that the PDC time you set is the correct one (there
might be a mistake in the TV programme guide). If the
broadcast you wanted to record did not send the good PDC
information, the VCR will not start recording.
• If the reception is poor, the PDC signal might be altered
and the VCR might not start recording.
Syn
c
h
ro
nized Recor
ding
The SYNCHRO REC
button turns off while
recording or does not go
back to recording
standby mode.
• The tape has reached its end. Insert a new tape and press
SYNCHRO REC again.
The Synchronized
Recording function does
not work.
• The connected equipment was not turned off.
Turn off the connected equipment and press SYNCHRO
REC again.
• There was a power failure. Press SYNCHRO REC again.
The programme recorded
with the Synchronized
Recording function is
incomplete.
• If the settings for timer recordings and Synchronized
Recording overlap, the programme that starts first has
priority and the second programme starts recording only
after the first programme has finished.
• There was a power failure. Press SYNCHRO REC again.
Othe
rs
A tape cannot be
inserted.
• Check that a tape is not already in the tape compartment.
The remote commander
does not function.
• Make sure you are pointing the remote commander at the
remote sensor on the VCR.
• Replace all the batteries in the remote commander with
new ones if they are weak.
• Make sure the
[TV]
/
[VIDEO]
remote control switch is set
correctly.
The selected input line
connector number does
not appear in the display
window.
• Press INPUT SELECT to display the connected line.
The tracking meter does
not appear on the TV
screen.
• The recording condition of the tape is very poor and
tracking cannot be adjusted.
You cannot control other
TVs.
• Set your TV’s code number. The code number may change
when you replace the batteries of the remote commander.
The display window
becomes dim.
• The display window automatically becomes dim when the
VCR is in standby or timer recording mode.
Symptom
Remedy
77
Index
Index
A
Adjusting
picture
64
tracking
64
Aerial hookup
16
Audio monitor
60, 61
Audio track
61
Auto Clock Set
20
Auto Set Up
20
Changing the programme
position
to a TV with a Scart
(EURO-AV) connector
Disabling the programme
positions
Dubbing. see Editing
E
Editing
68
H
Hi-fi audio track
61
I
Index scan
62
Index search
62
L
Language selection
23
LP mode
37
M
Manual fine tuning
26
Monaural
61
N
PDC (Programme Delivery
Control)
61
60
saving
39
stereo programmes
60
timer setting
50
using the VI
system
46
what you are watching on
the TV
40
while watching another
programme
38
RF channel
20
S
Safety tab
39
Scart connection
17
Searching
at various speeds
53
using the index function
62
Smart trilogic
64
SMARTLINK
NexTView Download
18
One Touch Menu
18
One Touch Play
18, 36
One Touch Timer
18
TV Direct Rec
18, 40
SP mode
37
Stereo
60
Synchronized Recording
57
T
Timer setting
50
cancelling
58
changing
58
checking
58
daily/weekly recording
48,
51
using the VI
system
46
V
VIDEOPLUS
recording
46
W
Wide screen forma
66
AC68-02101R
Sony Corporation
Printed in Indonesia
Quick Start Guide
1
Connecting the VCR
1
... Connect the aerial to
of the VCR.
2
... Connect
and the aerial input of your
TV using the supplied aerial cable.
3
... For better picture and sound, connect
LINE-1 (EURO AV) to your TV using a
Scart cable if your TV has a Scart
(EURO-AV) connector.
2
Using the Auto Set Up function
1
... Turn on your TV and set it to the video
channel.
If your TV does not have a Scart
(EURO-AV) connector, tune the TV to
channel 21 (the initial RF channel of this
VCR). Refer to your TV’s manual for
TV tuning instructions. If the picture
does not appear clearly, see “To change
the RF channel.”
2
... Connect the mains lead to the mains.
3
... Press OK.
When all of the receivable channels are
preset, the menu disappears from the TV
screen. You can rearrange the programme
position in any order (see “Changing/
disabling programme positions”).
3
Setting the clock
1
... Press MENU, then press
M
/
m
/
<
/
,
to
highlight CLOCK SET and press OK.
2
... Press
M
/
m
to set the hour, then press
,
.
3
... Press
M
/
m
to set the minutes. Set the
day, month, and year in sequence by
pressing
,
to select the item to be set,
and press
M
/
m
to select the digits, then
press OK.
4
... Press MENU.
Now you can operate your VCR.
1
2
3
4
:Signal flow
LINE-1
(EURO AV)
75
Troubleshooting
Ad
di
tiona
l In
fo
rm
ation
Othe
rs
The VCR needs to be
cleaned.
• Clean the cabinet, panel and controls with a dry, soft cloth,
or a soft cloth slightly moistened with a mild detergent
solution. Do not use any type of solvent, such as alcohol or
benzine.
The Line Through
function does not
operate.
• Set POWER SAVE in the USER SET menu to OFF (see
page 65).
Symptom
Remedy
Symptoms caused by contaminated video heads
• Normal picture
• Rough picture
initial
contamination
• Unclear picture
• No picture (or
black & white
screen appears)
terminal
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
