Sony RM-1000BP, Operating Instructions Manual

Page: 36 / 96

1-GB
Separate HOLD Setting
You can set the each control key to the key that is set to HOLD or the key that can be operated
when the HOLD switch is set to ON.
The default setting is that all operations are set to HOLD.
Setting to the separate HOLD setting status
1 Slide the HOLD switch to ON.
This unit is set to the HOLD mode.
While you press and hold the DISPLAY key, press and hold the SEL/
PUSH EXEC lever to the left for two seconds or more.
This unit enters the HOLD key editable mode.
By changing the position of the ZOOM SPEED switch, you can select the mode among
the following three modes.
ZOOM SPEED
switch position
Mode Function
Mode
display
HOLD
key select
mode
In this mode, the operation of that key
toggles between usable/prohibited when set
to HOLD.
POWER
LED lights
(red).
HOLD
key check
and store
mode
In this mode, whether the control key can
be operated when this unit is set to HOLD is
displayed on the REC LED by pressing the
key.
Press and hold the SEL/PUSH EXEC lever
for two seconds or more to store the setting
set in the HOLD key select mode.
POWER
LED lights
(orange).
HOLD
key
initialize
mode
In this mode, press and hold the SEL/PUSH
EXEC lever for two seconds or more to
initialize the setting of the control key.
POWER
LED blinks
(red).