PRS-T1 | Charging the Reader | Reader™ User Guide
Method
Description
[Data Transfer Mode]:
You can install the Reader software, or transfer files
from your computer to the Reader while charging
the Reader. In this mode, the Reader cannot be
operated.
When you select this method, the Reader is detected on
your computer, and the [READER] and [SETTING]
drives appear on
your computer. See
When the
icon turns into the
icon, charging
is complete. See
When charging is complete, disconnect the USB cable
from the Reader and your computer.
After a short time, the [Home] screen will appear.
[Press the
(Home) button.]:
The [Home] screen appears. While charging, the battery
status indicator changes to
. See
charging is complete, the battery status indicator
changes to
. Disconnect the USB cable from the
Reader and your computer.
Note
●
Your computer must be turned on to charge the Reader via USB mode. The Reader will not be charged if your computer enters sleep
mode, etc.
Tip
You can also charge the Reader using the AC adapter (PRSA-AC10/PRSA-AC1A, not supplied). This method of charging will take
approximately 2 hours to fully charge the battery.
Battery status indicator
The battery status indicator at the right side of the status bar shows the approximate remaining charge of the battery.
file:///F|/Documents%20and%20Settings/203098/Desktop/4-288-613-11/eng/contents/01/04/01/01.html (2 of 3)7/11/2011 8:58:19 PM
