29
H
ook
up
s and
Se
tti
n
gs
b
Notes
• Pictures containing copy protection signals that prohibit any copying cannot be recorded.
• If you pass the recorder signals through a VCR, you may not receive a clear image on your TV screen.
Be sure to connect your VCR to the DVD recorder and to your TV in the order shown below. To watch
video tapes, watch the tapes through a second line input on your TV.
• To watch the connected VCR or similar device’s pictures through the recorder while the recorder is in
standby mode, set “Power Save” to “Off” (default) in the “Basic” setup (page 107).
• If you disconnect the recorder’s AC power cord (mains lead), you will not be able to view the signals
from the connected VCR.
• Connect the equipment that outputs only monaural sound to the L(MONO) and VIDEO input jacks on
the front of the recorder (LINE 2 IN jack).
VCR
DVD recorder
TV
Line input 1
Line input 2
DVD recorder
VCR
TV
,
continued