56
“Update”: Sets the recorder
automatically replacing the previous
timer recording with the new one.
“Genre”: Sets the genre.
• To enter a title name, select “Set Title
Name” and press ENTER (page 34).
• If you make a mistake, select the item
and change the setting.
4
Select “OK,” and press ENTER.
The “Timer List” display appears
(page 60).
The timer recording indicator lights up
on the front panel display and the
recorder is ready to start recording.
Unlike a VCR, there is no need to turn off
the recorder before the timer recording
starts.
To stop recording during timer recording
Press
x
REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
On-screen instructions may appear after
pressing
x
REC STOP. In this case, follow
the on-screen instructions.
Rec. Mode Adjust
If there is not enough available disc space for
the recording, the recorder automatically
adjusts the recording mode to enable the
entire programme to be recorded. Set “Rec.
Mode Adjust” to “On” in the “Recording”
setup (page 127).
If the timer settings overlap
The confirmation screen appears.
To store the setting, select “Yes.”
To cancel the overlapped setting, select “No.”
To confirm, change, or cancel a timer
recording
See “Checking/Changing/Cancelling Timer
Settings (Timer List)” on page 60.
z
Hints
• You can also display the Timer display by
selecting “Timer Recording” from the System
Menu.
• If you are recording to the HDD, you can play the
title as it is being recorded by selecting the
programme title on the Title List (page 71).
b
Notes
• If a message indicating that the HDD is full
appears on the screen, change the recording
destination to “DVD,” or make available space
for the recording (page 75).
• If there is not enough available DVD disc space
for the recording, the recorder automatically
records the programme to the HDD even if you
select “DVD” (Recovery Recording).
• Check that the clock is correctly set before setting
the timer recording. If not, the timer recording
cannot be made.
• To record a satellite programme, turn on the
satellite tuner and select the satellite programme
you want to record. Leave the satellite tuner
turned on until the recorder finishes recording.
• Even if the timer is set for the same daily or
weekly programme, the timer recording cannot be
made if it overlaps with a programme that has
priority. “Overlap” will appear next to the
overlapped setting in the Timer List. Check the
priority order of the settings (page 60).
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has
priority.
• The “Rec. Mode Adjust” function only works
with a timer recording. It does not function with
Quick Timer.
