89
A
d
d
iti
o
n
a
l In
fo
rm
a
tio
n
Notes about the discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface. Dust,
fingerprints, or scratches on the disc may
cause it to malfunction.
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave
it in a car parked in direct sunlight as the
temperature may rise considerably inside
the car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth. Wipe
the disc from the center out.
• Do not use solvents such as benzine,
thinner, commercially available cleaners, or
anti-static spray intended for vinyl LPs.
• Do not use the following discs.
– A disc that has a non-standard shape (e.g.,
card, heart).
– A disc with a label or sticker on it.
– A disc that has cellophane tape or sticker
adhesive on it.
Specifications
System
Laser:
Semiconductor laser
Channel coverage:
NTSC
VHF: 2 to 13
UHF: 14 to 69
CATV: A-8 to A-1, A to W, W+1 to
W+84
Video reception:
Frequency synthesizer
system
Audio reception:
Inter carrier system
Antenna:
75-ohm antenna terminal for
VHF/UHF
Timer:
Clock: Quartz locked/Timer
indication: 12-hour cycle (digital)/
Power back-up duration: 1 hour
Video recording format:
MPEG-2,
MPEG-1
Audio recording format/applicable
bit rate:
Dolby Digital 2 ch
256 kbps/128 kbps (in EP and SLP
mode)
Inputs and outputs
LINE OUT
(AUDIO):
Phono jack/2 Vrms/10 kilohms
(VIDEO):
Phono jack/1.0 Vp-p
(S VIDEO):
4-pin mini DIN/Y: 1.0 Vp-p,
C: 0.286 Vp-p
LINE 1 IN/LINE 2 IN
(AUDIO):
Phono jack/2 Vrms/more than
22 kilohms
(VIDEO):
Phono jack/1.0 Vp-p
(S VIDEO):
4-pin mini DIN/Y: 1.0 Vp-p,
C: 0.286 Vp-p
DV IN:
4-pin/i.LINK S100
DIGITAL OUT (COAXIAL):
Phono jack/
0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT (Y, P
B
,
P
R
):
Phono jack/Y: 1.0 Vp-p/
P
B
, P
R
: 0.7 Vp-p
,
continued