14
Step 3: Connecting the Audio Cords/HDMI Cord
Select one of the following patterns,
A
or
B
, according to the input jack on your TV monitor, projector,
or audio component such as an AV amplifier (receiver). This will enable you to listen to sound.
A
Digital audio input jack
If your audio component has a Dolby
*1
Digital,
DTS
*2
, or MPEG audio decoder and a digital
input jack, use this connection. You can enjoy
Dolby Digital (5.1ch), DTS (5.1ch), and MPEG
audio (5.1ch) surround effects.
B
Audio L/R (left/right) input jacks
This connection will use your TV’s or audio
component’s two speakers for sound.
z
Hint
For correct speaker location, refer to the operating
instructions supplied with the connected components.
VIDEO
R
L
- AUDIO -
LINE 1 IN
~
AC IN
HDMI OUT
Y
PB
PR
COAXIAL
VIDEO
R
L
- AUDIO -
R
L
- AUDIO -
PCM/DTS/
MPEG/
DOLBY DIGITAL
VIDEO OUT
COMPONENT
AUDIO OUT
DIGITAL OUT
LINE OUT
SET TOP
BOX
CONTROL
A
B
VIDEO
R
L
- AUDIO -
LINE OUT
HDMI OUT
COAXIAL
PCM/DTS/
MPEG/
DOLBY DIGITAL
DIGITAL OUT
Audio component with
a decoder
(white)
TV, projector, or
audio component
Audio cord
(supplied)
: Signal flow
Coaxial digital cord
(not supplied)
to DIGITAL OUT
(COAXIAL)
to LINE OUT (AUDIO L/R)
Rear (L)
DVD recorder
(red)
(white)
(red)
[Speakers]
Front (L)
[Speakers]
to coaxial/HDMI digital input
Rear (R)
Front (R)
Subwoofer
Center
HDMI cord (not
supplied)
to HDMI OUT
or