Sony RDR-GX220, Operating Instructions Manual

Page: 15 / 100

15
H
ook
up
s and
Se
tti
n
gs
b
Notes
• Do not connect your TV’s audio output jacks to
the LINE IN (R-AUDIO-L) jacks at the same
time. This will cause unwanted noise to come
from your TV’s speakers.
• With connection
B
, do not connect the LINE IN
(R-AUDIO-L) and LINE OUT (R-AUDIO-L)
jacks to your TV’s audio output jacks at the same
time. This will cause unwanted noise to come
from your TV’s speakers.
• With connection A , after you have completed the
connection, make the appropriate settings under
“Easy Setup - Audio Connection” (page 19).
Otherwise, no sound or a loud noise will come
from your speakers.
*1
Manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
*2
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Step 4: Connecting the
AC Power Cord (Mains
Lead)
Connect the supplied AC power cord (mains
lead) to the AC IN terminal of the recorder.
Then plug the recorder and TV power cords
(mains leads) into the mains. After you
connect the AC power cord (mains lead),
you must wait for a short while before
operating the recorder.
You can operate
the recorder once the front panel display
lights up and the recorder enters standby
mode.
If you connect additional equipment to this
recorder (page 20), be sure to connect the AC
power cord (mains lead) after all connections
are complete.
~
AC IN
to mains
to AC IN
1
2