background image

52

RCD-W3

SECTION  6

EXPLODED VIEWS

6-1. FRONT PANEL SECTION

NOTE:

• -XX, -X mean standardized parts, so they may have

some difference from the original one.

• Items marked “*” are not stocked since they are

seldom required for routine service. Some delay
should be anticipated when ordering these items.

• The mechanical parts with no reference number in

the exploded views are not supplied.

• Hardware (# mark) list and accessories and pack-

ing materials are given in the last of this parts list.

• Abbreviation

CND

: Canadian model

Ref. No.

Part No.

Description

Remark

Ref. No.

Part No.

Description

Remark

The components identified by mark 

!

 or

dotted line with mark 

!

 are critical for safety.

Replace only with part number specified.

Les composants identifiés par une marque
 

!

 sont critiques pour la sécurité.

Ne les remplacer que par une piéce portant le
numéro spécifié.

When indicating parts by reference number,
please include the board name.

1

2

3

4

5

6

7

7

11

7

7

10

8

not supplied

not supplied

not supplied

not 

supplied

not 
supplied

FLD801

not 

supplied

7

9

10

10

Ver 1.1  2002.10

1

4-235-379-01 KNOB, REC VOL (BLACK)

1

4-243-930-01 KNOB, REC VOL (SILVER) (AEP,UK)

2

4-243-592-01 DOOR, TRAY (REC) (BLACK)

2

4-243-828-01 DOOR, TRAY (REC) (SILVER) (AEP,UK)

3

4-243-591-01 DOOR, TRAY (PLAY) (BLACK)

3

4-243-827-01 DOOR, TRAY (PLAY) (SILVER) (AEP,UK)

4

4-235-378-01 KNOB, P/VOLUME (BLACK)

4

4-243-929-01 KNOB, P/VOLUME (SILVER) (AEP,UK)

5

4-243-584-01 PANEL ASSY, FRONT (BLACK)

5

4-243-932-01 PANEL ASSY, FRONT (SILVER) (AEP,UK)

6

4-235-380-01 KNOB, POWE (BLACK)

6

4-243-931-01 KNOB, POEWR (SILVER) (AEP,UK)

7

4-235-377-01 SCREW, SPECIAL

8

A-4731-039-A FL BOARD, COMPLETE

9

4-235-363-01 CASE, TOP (BLACK)

9

4-243-826-01 CASE, TOP (SILVER) (AEP,UK)

10

4-243-598-01 SCREW (CASE) (BLACK)

10

4-243-829-01 SCREW (CASE) (SILVER) (AEP,UK)

11

1-824-266-11 WIRE (FLAT TYPE) (20 CORE)

FLD801 1-518-830-11 INDICATOR TUBE, FLUORESCENT

Summary of Contents for RCD-W3 - Cd/cdr Recorder/player



































































Reviews: