000
5. Network Configuration
67
You can transmit the video and audio captured/
played back with the camcorder via the Internet or
local network.
Preparation for Streaming
Transmission
1
Connect the camcorder to the Internet using
the procedures in “Connecting Devices using
Wireless LAN” (page 58) and “Connecting to
the Internet” (page 62).
2
Select Preset1 (or Preset2, Preset3) in
Maintenance >Streaming in the setup menu.
The streaming connection destination setup
screen appears.
3
Set Size, Bit Rate, Type, and items according to
Type on the screen.
For details and limitations about settings, see
“Streaming settings” (page 72).
4
Select Preset1 (or Preset2, Preset3), set in steps
1
and
2
, in Maintenance >Streaming >Preset
Select in the setup menu.
Starting Streaming
1
Set Maintenance >Streaming >Setting in the
setup menu to On.
Streaming starts according to the settings.
You can assign Streaming to an assignable
switch. For details about assignment, see
“Assigning Functions to Assignable Switches”
(page 112).
[Notes]
ˎ
ˎ
Streaming cannot be started under the following menu
settings.
– When Maintenance >Network >Setting in the setup
menu is set to Off
– When Maintenance >Network Client Mode >Setting in
the setup menu is set to On
– When Maintenance >Network >Setting in the setup
menu is set to On, but Maintenance >Network
>Wireless Network is set to Off and Maintenance
>Network >Wired LAN is set to Disable
ˎ
ˎ
It may take several tens of seconds to stream actual video
or audio after starting streaming.
ˎ
ˎ
You cannot start streaming when playing back an SD
format clip.
ˎ
ˎ
If you set the streaming transmission destination is set
incorrectly or the camcorder does not connect to the
network, “×” appears on the screen as the streaming
status indicator.
ˎ
ˎ
Streaming in network client mode (page 68),
monitoring, proxy recording, and file transfer are not
available after switching to streaming mode.
ˎ
ˎ
Starting streaming while monitoring, proxy recording, or
transferring files will stop the corresponding function.
Stopping Streaming
Set Maintenance >Streaming >Setting to Off to
stop streaming.
When Streaming is On, streaming can also be
stopped by pressing the assignable switch to
which Streaming has been assigned.
When the camcorder is connected to a device
via Wireless LAN (page 58) or is connected to
the Internet using wireless LAN station mode
(page 60), you can also set the streaming
transmission destination and start/stop streaming
from the web menu (page 71).
Transmitting Streaming Video and Audio