000
7. Menu Display and Settings
112
Assigning Functions to Assignable Switches
Using the Assignable Switch item of the Operation menu, you can assign user-specified functions to the
ASSIGN. 0 to 3 switches, the ASSIGNABLE 4 and 5 switches, the ONLINE button, and the RET button on the
lens.
The following tables lists the functions that are assigned when the camcorder is shipped from the factory.
Switch or button
Function
Assignable Switch setting
ASSIGN. 0 switch
No assignment
Off
ASSIGN. 1 switch
No assignment
Off
ASSIGN. 2 switch
No assignment
Off
ASSIGN. 3 switch
No assignment
Off
ASSIGNABLE 4 switch
No assignment
Off
ASSIGNABLE 5 switch
No assignment
Off
RET button
Rec Review (if playback is allowed)
Lens RET
ONLINE button
Auto transfer proxy clip
Network Client Mode
Functions That Can Be Assigned to the ASSIGN. 0 Switch
Assignable Switch setting Function
State when camcorder is
next powered on
Off
No assignment
—
Marker
Turns the display of all markers on/off.
Setting retained
ATW Hold
Holds the white balance setting in the ATW
(auto-tracking white balance) mode
—
Picture Cache Rec
Turns picture cache recording mode on/off.
Setting retained
Focus Magnifier
Turns the focus magnification function on/off.
Setting not retained
Zebra
Turns zebra display on/off.
Setting not retained
Shot Mark1
Writes Shot Mark1.
—
Shot Mark2
Writes Shot Mark2.
—
Clip Flag OK
Adds/Clears an OK mark to/from the clip being
recorded or played.
Setting not retained
Clip Flag NG
Adds/Clears an NG mark to/from the clip being
recorded or played.
Setting not retained
Clip Flag Keep
Adds/Clears a KP (Keep) mark to/from the clip
being recorded or played.
Setting not retained
Flash Band Reduce
1)
Turns the flashband correction function on/off.
Setting not retained
1) Even when Flash Band Reduce is set to On, the function does not operate if the SHUTTER switch is set to ON.
Functions That Can Be Assigned to the ASSIGN. 2 Switch
[Note]
Immediately after you assign a function to the ASSIGN. 2 switch or you switch the recording format, the setting of the switch at
that point may not match the camcorder’s internal state. After assigning a function, switch the ASSIGN. 2 switch or power the
camcorder off and on again.
Assignable Switch setting Function
Off
No assignment
Front Mic
Switches between stereo and monaural when a stereo microphone is connected.
Marker
Turns the display of all markers on/off.
Picture Cache Rec
1)
Turns picture cache recording mode on/off.
Zebra
Turns zebra display on/off.
Clip Continuous Rec
Turns Clip Continuous Rec mode on/off.
Rec Source
Switches the signals to be recorded between the camera picture and external
input. (If the camcorder is currently recording or playing, the switch takes effect
after recording or playback ends.)
1) When Picture Cache Rec is assigned, Operation >Rec Function is disabled (grayed out) and cannot be set.
