000
5. Network Configuration: Configuring from the Web Menu
72
Streaming settings
You can set the format and transmission
destination for streaming. Up to three settings can
be preset.
Item
Description
Setting
On/Off
Switches streaming
transmission on/off.
On/Off
Preset
Selects the preset
from Preset 1 to
Preset 3. You can
edit Preset by
tapping Edit.
Preset1/Preset2/
Preset3
Type
Selects the type of
video for streaming.
MPEG-2 TS/UDP/
MPEG-2 TS/
RTP
Size
Sets the size of
video for streaming.
When HD Auto is
selected, the size is
set to 1920×1080 or
1280×720,
according to the
setting of the
recording format
recorded on the
SxS memory card or
the format of the
clip to be played
back.
HD Auto/
1280×720/
640×360/
480×270/
320×180
Bit Rate
Sets the bit rate of
video for streaming.
The selectable bit
rate varies
depending on the
Size setting.
9Mbps/6Mbps/
3Mbps/2Mbps/
1Mbps/0.5Mbps/
0.3Mbps(Mono L)/
0.3Mbps(Mono R)/
0.2Mbps(Mono L)/
0.2Mbps(Mono R)
Destination
Address
Enter the address of
the transmission
destination server
for streaming data.
Host name or IP
address
Item
Description
Setting
Destination
Port
Enter the port
number of the
transmission
destination server
used for streaming.
1 to 65535
Audio
Channel
Select
Selects the audio
channels for the
streaming output.
Ch-1 & Ch-2/
Ch-3 & Ch-4
[Notes]
ˎ
ˎ
When Streaming is set to On, the monitoring function
cannot be used.
ˎ
ˎ
Audio/video data is transmitted as-is via the Internet.
Accordingly, the data may potentially be exposed to other
parties.
Always check that the transmission destination can
receive the streaming data.
The data may be sent to an unintended party if the
address or other settings are configured incorrectly.
ˎ
ˎ
Not all frames may be played, depending on the status of
the network.
ˎ
ˎ
The picture quality may deteriorate in scenes with
excessive motion.
ˎ
ˎ
Not all frames may be played when the stream is set to a
large size with a small bit rate.
To reduce this, select a smaller size for the Size setting.
ˎ
ˎ
If a network with bandwidth of less than 500 kbps is used,
Size and Bit Rate are set to the following.
– When Size is 480×270, Bit Rate is set to 0.3Mbps(Mono
L), 0.3Mbps(Mono R), 0.2Mbps(Mono L), or
0.2Mbps(Mono R).
– When Size is 320×180, Bit Rate is set to 0.2Mbps(Mono
L) or 0.2Mbps(Mono R).
When this occurs, video is set to a frame rate of 10 fps, and
audio is set to a sampling frequency of 48 kHz and a bit
rate of 56 kbps.
ˎ
ˎ
When Bit Rate is 0.3Mbps(Mono L) or 0.2Mbps(Mono L),
Audio Channel Select >Ch-1 & Ch-2 is set to Ch-1 or Ch-3
& Ch-4 is set to Ch-3.
When Bit Rate is 0.3Mbps(Mono R) or 0.2Mbps(Mono R),
Audio Channel Select >Ch-1 & Ch-2 is set to Ch-2 or Ch-3
& Ch-4 is set to Ch-4.
Proxy Format Settings
You can set the format of the proxy file that is
recorded on the SD card of the camcorder.
Video
ˎ
ˎ
XAVC Proxy (AVC/H.264 Main Profile, 4:2:0 Long
GOP)
ˎ
ˎ
Size is selected in the following settings.
Audio
ˎ
ˎ
AAC-LC compression
ˎ
ˎ
Sampling frequency: 48 kHz
ˎ
ˎ
Bit rate: 128 kbps for stereo
Item
Description
Setting
Proxy File
recording
>Size
Sets the video size
and bit rate for
proxy files.
HD Auto(9Mbps)/
HD Auto(6Mbps)/
1280×720(9Mbps)/
1280×720(6Mbps)/
640×360(3Mbps)/
480×270(1Mbps)/
480×270(0.5Mbps)
Proxy File
recording
>Frame
Rate
Displays the video
frame rate for proxy
files.
23.98fps/
25fps/
29.97fps/
50fps/
59.94fps
Proxy File
recording
>Bit Rate
Displays the video
bit rate for proxy
files.
9Mbps(VBR)/
6Mbps(VBR)/
3Mbps(VBR)/
1Mbps(VBR)/
0.5Mbps(VBR)
Item
Description
Setting
Proxy File
recording
>Audio
Channel
Select
Sets the audio
channel to record
to proxy data.
Ch-1 & Ch-2/
Ch-3 & Ch-4
[Notes]
ˎ
ˎ
The bit rate is an average value, so this value may be
exceeded at times.
ˎ
ˎ
24 fps is not supported.
ˎ
ˎ
When HD Auto is selected for Size in the proxy format
settings, the proxy format is set according to the setting of
the recording format recorded on the SxS memory card or
the format of the clip to be played back.
ˎ
ˎ
Proxy files recorded with Size set to HD Auto in the proxy
format settings may not be able to be played in a browser
or Content Browser Mobile. Insert SD cards for recording
proxy files directly into a computer to play the files.
Wireless LAN Station Settings
Use this screen to make settings for connecting
the camcorder to a wireless LAN.
Item
Description
Host Name
Name of the camcorder (can be
modified)
SSID
Displays the SSID selected in
[Access Point].
Key
Enter the password for the
access point.
