manualshive.com logo in svg

Sony PXW-X500, Manual

Share
Download
Sony PXW-X500 Manual Download Page 209

209

• Android and Google Chrome are trademarks or 

registered trademarks of Google, Inc.

• Microsoft, Windows, and Windows Vista are 

either registered trademarks or trademarks of 
Microsoft Corporation in the United States and/
or other countries.

• Apple, Macintosh, Safari, and iPhone and their 

logos are trademarks or registered trademarks 
of Apple Inc. registered in the US and other 
countries.

• The terms HDMI and HDMI High-Definition 

Multimedia Interface, and the HDMI Logo are 
trademarks or registered trademarks of HDMI 
Licensing LLC in the United States and other 
countries.

• Wi-Fi Protected Setup™ (WPS) is a trademark 

of the Wi-Fi Alliance.

• All system names and product names are 

registered trademarks or trademarks of their 
respective owners. Trademarked items are not 
indicated by ® or ™ symbols in this document.

Trademarks

Summary of Contents for PXW-X500




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands