000
1. Overview
9
Screen Display
Viewfinder Screen
During shooting (recording/standby) and playback, the camcorder status and settings are superimposed
on the image displayed in the viewfinder.
You can show/hide the information using the DISPLAY button.
You can also select to show/hide each item independently (page 63).
The 17:9 aspect ratio picture captured by the image sensor is displayed in the viewfinder.
In 16:9 recording formats, the dark portions on the left and right edges are not recorded.
Information displayed on the screen while shooting
1 2 3 4 5
6
7
8 9
10 11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
36
37
38
39
40
35
34
33
32
31
30
29
28
1.
Shutter mode/shutter speed indicator
(page 33)
2.
3.
Displayed as an EI value when Base Setting
(page 69) >Shooting Mode in the System menu
is set to Cine EI.
4.
Focus position indicator
Displays the focus position (if a lens that supports
focus setting display is attached).
5.
Recording mode, slot A/B icon, and status
indicators
Display
Meaning
/
Rec
Recording
/
Stby
Standby
S&Q
/
Rec Slow & Quick Motion, High
Frame Rate mode recording
S&Q
/
Stby
Slow & Quick Motion, High
Frame Rate mode standby
Int
/
Rec
Interval Rec recording
Int
/
Stby Interval Rec image loading
standby
Int
/
Stby
Interval Rec recording standby
Display
Meaning
/
Picture cache recording
/
Cache
Picture cache standby
6.
Slot B icon and status indicators
Display
Meaning
Rec
Recording
Stby
Standby
7.
External RAW recording indicator
(page 39)
8.
Depth-of-field indicator
9.
Color temperature indicator (page 34)
10.
S&Q Motion frame rate indicator
(page 36)/Interval Rec recording interval
display (page 37)
11.
Remaining battery capacity/DC IN voltage
indicator (page 13)
12.
Recording format (picture size) indicator
(page 21, 70)
Displays the picture size for recording on XQD
memory cards.
The image sensor scan mode (F: 2K Full, C: 2K
Center) is displayed on the left of the picture size.
Only the scan mode is displayed if Codec is set to
RAW (2KF: 2K Full, 2KC: 2K Center).
13.
Recording format (frame rate and scan
method) indicator
14.
Recording format (codec) indicator
(page 33)
Displays the name of the format for recording on
XQD memory cards.
15.
Gamma/monitor LUT indicator (page 56,
61)
Displays the gamma setting. When Shooting Mode
(page 69) is set to Cine EI, it displays the gamma
or monitor LUT setting for recording video on XQD
memory cards.
16.
External RAW output format indicator
(page 39)
17.
Timecode external lock indicator
Displays “EXT-LK” when locked to the timecode of
an external device.
18.
Wi-Fi connection status indicator
(page 41)
Displayed when the Wi-Fi function is set to Enable.
When the IFU-WLM3 is not attached to the
camcorder, is not displayed.
19.
GPS status indicator (page 39)
Displays the GPS status.
20.
Focus assist indicator (page 31)
Displays a detection frame (focus area marker)
indicating the area for detection of focus, and
a level bar (focus assist indicator) indicating the
degree of focus within that area.
21.
Video signal monitor
Displays a waveform, vectorscope, and histogram
(page 39).
22.
Slot A/B media status/remaining capacity
indicator (page 24)
Indicates recording media when the left side of the
icon is orange.
Indicates playback media when the green
indicator on the top right of the icon is on.
23.
Spirit level indicator
Displays the horizontal level and the front-to-rear
slope in ±1° increments up to ±20°.
24.
Audio level meter
CH3 and CH4 can be monitored on the status
screen.
25.
26.
Focus assist indicator (page 31)
27.
28.
