manualshive.com logo in svg

Sony PXW-FS7M2, Operating Instructions Manual

Share
Download
Sony PXW-FS7M2 Operating Instructions Manual Download Page 25

000

2. Preparation

25

Using a UTILITY SD Card

You can save camera configuration data for the 
camcorder on an SD card (available separately).
Saved data files can be imported from the SD card.

Supported SD Cards

SDHC memory cards

*

SD memory cards

*

*  Referred to collectively as “SD cards” in this manual.

Inserting an SD Card

1 

Press the media cover release button 
(page 7) to open the media cover of the 
card slot section.

2 

Insert the SD memory card with the SD card 
label facing to the left.
The access indicator (page 7) is lit red, then 
goes off if the card is usable.

3 

Close the media cover.

Ejecting the SD Card

Press the media cover release button (page 7) 
to open the media cover of the card slot section, 
and lightly press the SD card in to eject the card.

[Notes]

ˎ

ˎ

If the camcorder is turned off or the SD card is removed 
while the SD card is being accessed, the integrity of data 
on the card cannot be guaranteed. All data recorded 
on the card may be discarded. Always make sure the 
access indicator is off before turning off the camcorder or 
removing the SD card.

ˎ

ˎ

Take caution to prevent the SD card from flying out when 

inserting/ejecting the card.

Formatting (Initializing) SD Cards

SD cards must be formatted the first time they are 
used in the camcorder.
SD cards for use in the camcorder should be 
formatted using the format function of the 
camcorder.

1 

Select Format Media (page 67) in the Media 
menu.

2 

Specify SD Card, then select Execute.
A confirmation message appears.

3 

Select Execute.
A message and progress status are displayed 
while formatting is in progress, and the access 
indicator is lit red.
When formatting is completed, a completion 
message is displayed. Press the SEL/SET dial to 
dismiss the message.

[Note]

Formatting an SD card erases all data on the card. The card 
cannot be restored.

Checking the Remaining Capacity

You can check the remaining capacity on an SD 
card on the Media Status screen (page 12).

[Note]

A 

 mark is displayed if the SD card is protected.

To use an SD card formatted on the camcorder in 

the slot of another device

First, make a backup of the card, then reformat the 
card in the device to be used.

Summary of Contents for PXW-FS7M2








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands