8
Attaching the accessory shoe
1
Lift the front edge of the shoe spring, and pull the
spring in the opposite direction to the arrow engraved
on the spring.
2
Position the accessory shoe on the accessory shoe
mount, aligning the protrusions on the shoe with the
corresponding points on the mount, and tighten the
four screws.
3
Insert the shoe spring in the direction of the arrow so
that the U-shaped portion fits onto the end of the
accessory shoe.
Removing the accessory shoe
Remove the show spring as described in step 1 in
“Attaching the Accessory Shoe,” unscrew the four
screws, and remove the accessory shoe.
Attaching the USB wireless LAN module guard
plate
1
Remove the handle attachment screw.
2
Attach the guard plate, and tighten the screw.
Removing the handle
Remove the four handle attachment screws, and
remove the handle from the camcorder.
Attaching the handle connector protective cap
(supplied)
When using the camcorder with the handle
removed, protect the connector using the supplied
protective cap.
Protecting the connector terminals
Attach the cover to unused connectors to protect
the connector terminals.
Shoe spring
Accessory shoe
Accessory shoe
Shoe spring
1
2
Summary of Contents for PXW-FS7
Page 128: ......
