Sony PXW-FS7 Operating Instructions Manual Download

Page: 23 / 128

Recommended lenses

SELP28135G
SEL1635Z
SELP18200

For details about lenses supported by the camcorder,
contact your Sony service representative.

Do not leave the lens facing the sun. Direct
sunlight can enter through the lens, be focused in
the camcorder, and may cause a fire.

Notes

• Attach/remove a lens while the camcorder is turned

off.

• A lens is a precision component. Do not place the lens

on a surface with the lens mount face down. Attach the
supplied lens mount cap.

Attaching to a tripod

Use the tripod screw holes on the camcorder
when attaching to a tripod. Using the tripod
mount on the lens may cause damage.

Attaching an E-mount lens

Remove the lens cap and cover from the
camcorder and the lens.

Align the lens mount mark (white) with
the camcorder, carefully insert the lens,
and then turn the lens clockwise.

The lens makes a click sound when it locks into
position.

Attaching an A-mount lens

To use an A-mount lens, attach a lens mount
adaptor (option) and then attach the A-mount
lens.

Notes

• When using an A-mount lens, Iris is set to manual.
• When focus is set to AF with an LA-EA2 or LA-EA4

attached, Iris is set to F3.5 or fully open.

Removing a lens

Remove a lens using the following procedure.

Press and hold the lens release button
and turn the lens counterclockwise.

Pull the lens out in the forward
direction.

Note

If another lens will not be attached immediately, fit the
lens mount into the recess part of the lens mount cap and
turn clockwise.

Iris adjustments for lenses with Auto Iris
switch

• When the lens Auto Iris is set to AUTO, the iris

is adjusted automatically and can also be
adjusted manually from the camcorder.

• When the lens Auto Iris is set to MANUAL, the

iris can only be adjusted using the lens ring. Iris
operation from the camcorder has no effect.

Attaching a Lens

Caution

Mount mark (white)

Summary of Contents for PXW-FS7

































































































































Search results

Summary of Contents for PXW-FS7

Reviews:

Related manuals for PXW-FS7

Brands by name

Popular brands

Sony PXW-FS7, Operating Instructions Manual

Search results

Summary of Contents for PXW-FS7

Reviews:

Related manuals for PXW-FS7

Brands by name

Popular brands