PS-HX500
10
2-3. COUNTER WEIGHT
2-4. BELT, PLATTER
counter weight
rear side
1
Rotate the counter weight in
the direction of the arrow.
2
counter weight
Note:
When installing the counter weight, refer to
“ADJUSTING
THE
TONE
ARM
BALANCE”
on
page
5.
top side
3
Insert the your finger into the hole and remove
the platter block in the direction of the arrow.
pulley
belt
2
Remove the belt from the pulley.
hole
hole
5
belt
6
platter
top side
4
platter block
Note 2:
When installing the platter block, refer to
“ASSEMBLING
THE
TURNTABLE”
on
page
4.
1
rubber mat
Note
1:
Make sure that the chamfered side of
the rubber mat faces upward.
The back side of the rubber is indicated
by the SONY imprint.
