PRS-950
8
2-9. CARD ASSY (FOX MINIATURE) (WW1)
Note:
When the WWAN antenna cable is removed, refer to “Wi-Fi OPERATION CHECK” (page 3).
2-10. WWAN ANTENNA (ANT1)
Note 1:
When the WWAN antenna is removed, refer to “Wi-Fi OPERATION CHECK” (page 3).
1
two new truster screws
(M2)
3
WWAN antenna cable
4
card assy (fox miniature)
(WW1)
2
– Rear side view (bottom side) –
4
Peel the adhesive.
– Rear side view (bottom side) –
2
WWAN antenna cable
5
WWAN antenna
(ANT1)
1
sheet (antenna)
Note
3:
When pasting sheet (antenna), please let me
stick to MAIN board rubbing on several times.
3
Peel the aluminum tape.
Note
4:
When pasting aluminum
tape, please let me stick to
MAIN board rubbing on
several
times.
3
Peel the aluminum tape.
Note
4:
When pasting aluminum tape, please let me
stick to MAIN board rubbing on several times.
chassis
WWAN antenna
MAIN board
1 + 1 (-0) mm
1 + 1 (-0) mm
mounted parts
mounted parts
sheet (antenna)
:
ire
S
ro
F
essi
QJ
WWAN antenna cable
Note 2:
Please take care not to run aground in the chassis.
