Fader Function
81
Record
ing
To cancel recording while a transition is in
progress
If you press the REC START/STOP button
during recording, the recording stops, even when
a shot transition is in progress.
The E-E picture of the settings where the
recording stops is displayed.
Releasing a Shot Transition
Press the MODE button so that the button
indicator goes dark.
The LCD monitor/EVF screen resumes the
normal condition.
Using the Fader function, you can start a
recording by fading in a scene or end a recording
by fading out of a scene.
The fader function can be assigned to an
assignable button.
For function assignment, see “Changing Functions
of the Assignable Buttons” on page 69.
Notes
• The fader function cannot be used in
combination with the Slow & Quick Motion,
Interval Recording, Frame Recording, or EX
Slow Shutter function.
• When a clip is recorded using the fade-in
function, a white or black screen becomes the
thumbnail image on the thumbnail screen
. In HD Mode, changing the index frame
may be useful for easier identification.
• When you perform recording on an external
device connected via the i.LINK(HDV/DV)
connector in synchronization with REC
START/STOP operations on this camcorder,
recording start/stop on the external device and
fade-in start/fade-out end may not be
synchronized, depending on the performance of
the external device.
Specify the conditions to activate the Fader
function in advance with the following
procedure:
1
Select “Fader” of the CAMERA SET
menu.
2
Specify the fade-in conditions.
Fader Function
Preparatory Settings
00:00
Fade I n
Fade I n Type
Fade I n Ti me
Fade Out
Fade Out Type
Fade Out Ti me
: O f f
: Black
: 2sec
: O f f
: Black
: 2sec
CAMERA SET
I n t e r v a l Rec
Frame Rec
P. Cache Rec
S&Q Mot i on
Rec Review : 3sec
Fader
TLCS
B
B
B
B
B
B