![background image](http://html.mh-extra.com/html/sony/pfv-l02/pfv-l02_installation-manual_417433007.webp)
1-3 (E)
PFV-L02
1-5. Installing Optional Board
The optional board can be installed in any empty slot of
PFV-L02.
Installing Main Board (Front side)
1.
Loosen the two screws and remove the front panel.
2.
Set the switch (S1) on the PS-607 board to OFF.
3.
Insert the main board along the board guides with the
board lever closed in the direction of arrow
1
shown
in the figure. Then, connect the main board securely
to the connector on the MB-932 board.
4.
Install the front panel in the reverse procedure of steps
1 and 2.
n
When removing the main board, open the board lever in
the direction indicated by arrow
2
and pull out the board
toward you.
Installing Connector Panel (Rear side)
The connector panel must be installed in the slot which
contains the main board.
1.
After removing the two screws, remove the blank
panel of the slot which contains the main board.
n
Keep the blank panel which is removed.
1-5. Installing Optional Board
Screws
Front panel
PS-607 board
S1
OFF
1
Main board
A side
Board lever
MB-932 board
Board guides
2
Main board
Board lever
Blank panel
B 2.6
x
4