95
Setup Menu
Chap
te
r 7
Men
u
s
Menu items in the 600s, relating to the timecode and metadata
Item number Item name
Settings
601
VITC POSITION
SEL-1
a)
In 59.94i/59.94P/
29.97P mode
Select the line into which to insert VITC signals (SD output)
12H to 16H to 20H:
Any line from line 12 through line 20.
Notes
• You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
• In 59.94i/59.94P/29.97P mode (J), output of wide picture information is
given priority if OUTPUT in setup menu item 731 is set to “auto” and the
VITC insertion line is set to line 16.
• In 59.94i/59.94P/29.97P mode (UC), output of wide picture information
is given priority if OUTPUT in setup menu item 731 is set to “auto” and
the VITC insertion line is set to line 20.
In 50i/50P/25P
mode
Select the line into which to insert VITC signals (SD output)
9H to 19H to 22H:
Any line from line 9 through line 22.
Note
You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
602
VITC POSITION
SEL-2
a)
In 59.94i/59.94P/
29.97P mode
Select the line into which to insert VITC signals (SD output)
12H to 18H to 20H:
Any line from line 12 through line 20.
Notes
• You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
• In 59.94i/59.94P/29.97P mode (J), output of wide picture information is
given priority if OUTPUT in setup menu item 731 is set to “auto” and the
VITC insertion line is set to line 16.
• In 59.94i/59.94P/29.97P mode (UC), output of wide picture information
is given priority if OUTPUT in setup menu item 731 is set to “auto” and
the VITC insertion line is set to line 20.
In 50i/50P/25P
mode
Select the line into which to insert VITC signals (SD output)
9H to 21H to 22H:
Any line from line 9 through line 22.
Note
You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
605
TCG REGEN MODE
Select the signal to be regenerated when the timecode generator is in
regeneration mode.
TC&UB
: Both the timecode and user bits are regenerated.
TC
: Only the timecode is regenerated.
UB
: Only the user bits are regenerated.
607
U-BIT BINARY GROUP FLAG
Select the user bits to be used in the timecode generated by the
timecode generator.
000:not specified [000]
: Character set not specified.
001:iso character [001]
: 8-bit characters compliant with ISO 646 and
ISO 2022.
010:unassigned-1 [010]
: Undefined.
011:unassigned-2 [011]
: Undefined.
100:unassigned-3 [100]
: Undefined.
101:page / line [101]
: SMPTE-262M page/line multiplex system.
110:unassigned-4 [110]
: Undefined.
111:unassigned-5 [111]
: Undefined.
611
TC OUTPUT PHASE IN EE MODE
Select the timecode output mode for output from the TIME CODE OUT
connector in EE mode.
through [thru]
: Output the timecode input to the TIME CODE IN
connector as is.
video input phase [v-in]
: Output the timecode with the same phase as
the input video signal phase.
video output phase [v-out]
: Output the timecode with the same phase
as the output video signal phase.
