Sony PCV-RX791 System Reference Manual Download

Page: 54 / 98

VAIO Digital Studio System Reference Manual

Covering an Open I/O Slot

Slot covers prevent air from escaping through the empty hole. If air
escapes, the components inside the computer cannot be properly cooled.
This may damage some components, especially the main processor,
which generates the most heat.

Slide the tip of the slot cover between the chassis and system board.

Push the slot cover down until it rests firmly on the lip in the chassis.
All add-in card brackets and slot covers rest on this lip.

Replace the slot cover's screw to secure the I/O slot cover.

Before opening the system unit, save and close all open files, exit all open

applications, turn off the power to all attached peripheral devices, shut
down the computer, and unplug the power cord.

Summary of Contents for PCV-RX791



































































































Search results

Summary of Contents for PCV-RX791

Reviews:

Related manuals for PCV-RX791

Brands by name

Popular brands

Sony PCV-RX791, System Reference Manual

Search results

Summary of Contents for PCV-RX791

Reviews:

Related manuals for PCV-RX791

Brands by name

Popular brands