The values stored in the CMOS memory are now reset to the factory default values. You must run the Setup
utility to reset the date, time, passwords, and other changes you may have made to the BIOS settings. If you do
not wish to customize your BIOS settings, you do not need to run the Setup utility. If you simply wish to reset the
date and time, see Windows
®
Help for instructions.
Installing an Additional Hard Disk Drive
Your computer comes with an available internal bay to hold a second standard 3½-inch hard disk
drive. (Some models, such as Configure-to-Order systems, may already have a second hard disk
drive.) The hard disk drive access light blinks when either internal drive is active. For information on
how to install additional drives into the external drive, see the computer
Reference Manual
. You can
download the
Reference Manual
from the Sony Web site at
http://www.sony.com/pcsupport
.
Before opening the system unit, save any open files, exit Windows, turn off the power of the computer and all
attached peripherals, and then unplug the
power cord.
Configure the jumpers on the new drive as a slave (see your drive's documentation for
configuration instructions).
Remove the cover as described in
Removing the Cover
.
Remove the screws that secure the drive holder to the chassis top.
Slide the drive holder forward and then out.
Page 324