Inserting an Add-in Board
Your computer has two open PCI expansion slots, enabling you to install add-in boards to expand
the functionality of your system. In PCV-R547DS and PCV-R549DS, slots 2 and 3 are available. In
PCV-R545DS, slots 3 and 4 are available.
Some models, such as Configure-to-Order systems, may already contain installed add-in cards.
To insert an add-in board
Make sure you observe the proper safety precautions when you add boards to your Sony computer. See
Notes on Use
in the
VAIO
®
Consumer Information Guide
.
Shut down your computer and turn off all peripheral devices, such as your printer.
Unplug your computer and any peripheral devices.
Remove the cover as described in
Removing the Cover
.
Locate one of the available expansion slots. Remove the screw, and then remove the slot cover.
Install the add-in board by plugging it into the expansion slot.
Page 321