GB
42
Specifications
1
Insert a wire (AWG Nos. 28 to 18)
into the desired wire opening on the
VISCA RS-422 connector plug, and
tighten the screw for that wire using a
flat-head screwdriver.
2
Insert the VISCA RS-422 connector
plug into the VISCA RS-422
connector.
To remove the connector plug
Grasp both ends of the VISCA RS-422
connector plug and pull it out as shown in
the illustration.
• In order to stabilize the voltage level of the
signal, connect both ends to GND.
• When the connections using the VISCA
RS-422 connectors are made, the VISCA
RS-232C connection is not available.
Using the VISCA RS-422
Connector Plug
Wire
Flat-head
screwdriver
1
2
3
4
5
6
7
8
9
Notes
1
2
3
4
5
6
7
8
9
Summary of Contents for PCSA-CHG90
