Sony PCSA-CHG90, Operating Instructions Manual

Page: 48 / 87

GB 4
Precautions
Precautions
Operating or storage location
Operating or storing the Camera Unit in the
following locations may cause damage to
the Camera Unit:
• Extremely hot or cold places (Operating
temperature: 5°C to 40°C [41°F to 104°F])
• Exposed in direct sunlight, or close to
heating equipment (e.g., near heaters)
• Close to sources of strong magnetism
• Close to sources of powerful
electromagnetic radiation, such as radios
or TV transmitters
• Locations subject to strong vibration or
shock
Ventilation
To prevent heat buildup, do not block air
circulation around the camera.
Transportation
When transporting the camera, repack it as
originally packed at the factory or in
materials equal in quality.
Cleaning
• Use a blower to remove dust from the lens
or optical filter.
• Use a soft, dry cloth to clean the external
surfaces of the camera. Stubborn stains
can be removed using a soft cloth
dampened with a small quantity of
detergent solution, then wipe dry.
• Do not use volatile solvents such as
alcohol, benzene or thinners as they may
damage the surface finishes.
Maintenance
The camera mechanism may cause abnormal
noise due to wear and lubrication loss after a
long period of use. To maintain optimum
performance, we recommend periodical
maintenance. If abnormal noise occurs,
consult with your Sony dealer.
Note on laser beams
Laser beams may damage a CCD. You are
cautioned that the surface of a CCD should
not be exposed to laser beam radiation in an
environment where a laser beam device is
used.
“IPELA” and are trademarks of Sony Corporation.