Removing a Memory Module
1.
Turn off the computer and all peripheral devices.
2.
Disconnect the power cord and all cables from the computer, and remove the battery.
3.
Wait for the computer to cool down.
The interior of the computer becomes extremely hot during operation. Wait at least one hour for the computer to
cool down before you remove the screws.
4.
Use an appropriate screwdriver to loosen and remove the three screws at the bottom of the computer.
To avoid damaging the computer, do not remove or loosen any other screws.
Rem ov ing Bottom Screws
5.
Slide the LCD lock lever and lift the cover.
6.
Slide the keyboard toward the LCD display, then lift it away slightly.
Lifting the Keyboard
7.
Lift the keyboard from the LCD display side.
8.
Gently turn the keyboard over the touchpad. Take care not to detach the cable when lifting the keyboard.
9.
Touch a metal object (such as the connector panel on the back of your computer) to discharge static electricity.
10.
Remove the memory module by pulling out the tabs (see arrows No. 1), and pulling out the module in the
direction of arrow No. 2.
Rem ov ing a Mem ory Module
11.
Gently replace the keyboard, then press it into your computer.
Page 108
Summary of Contents for PCG-SRX87 VAIO User Guide (primary manual)
Page 39: ...16 Click OK Page 39 ...
