Sony PCG-SRX87 VAIO User Guide (primary manual) User Manual Download Page 51

Page: 51 / 177

To connect an i.LINK optical disc drive

Use a VAIO

Computer Peripheral Cable (supplied with the i.LINK drive) to connect the optical disc drive to the computer.

Before connecting or disconnecting this drive, close any active applications to help prevent data loss.

Turn on power to the computer. Insert the L-shaped plug of the VAIO

Computer Peripheral Cable into the

matching jack on the rear of the i.LINK drive. Secure the plug by turning the screw on the cable connector
clockwise.

Connecting i.LINK optical disc driv e

Insert the straight-shaped, two-prong plug of the VAIO

computer peripheral cable into both the computer's

i.LINK port and peripheral device DC Out jack.

The i.LINK drive's power indicator lights up, and the computer will automatically detect and identify the connected
drive.

Click Start on the Windows

taskbar, and select My Computer to verify that an icon for the i.LINK optical disc drive

has been added in the window.

The Sony i.LINK optical disc drive is compatible only with certain Sony VAIO

PCG series computers preinstalled with

Microsoft

Windows

XP Home Edition or Professional.

Page 51

Summary of Contents for PCG-SRX87 VAIO User Guide (primary manual)


















































































































































































Search results

Summary of Contents for PCG-SRX87 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-SRX87 VAIO User Guide (primary manual)

Brands by name

Popular brands

Sony PCG-SRX87 VAIO User Guide (primary manual), User Manual

Search results

Summary of Contents for PCG-SRX87 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-SRX87 VAIO User Guide (primary manual)

Brands by name

Popular brands