Sony Not
e
book Us
er
G
u
id
e
Getting help
78
The optional PCGA-UFD5 (USB) floppy disk drive is not recognized as drive A
To set the UFD5 to A, proceed as follows :
1
Turn the system power off and remove the docking station.
2
Turn the system power on.
3
Connect the UFD5
4
Select
Control Panel
from the
Start
menu.
5
Double-click
System
.
6
Select the
Hardware
tab, then click
Device Manager
.
7
Select
Universal Serial Bus controllers
, then
Y-E Data USB Floppy
.
8
Select
Operation
, then
Delete
.
9
Keep clicking
OK
until the
Confirmation of deletion of device
message appears.
10
Perform the
Scan to change hardware
from
Operation
.
The UFD5 is recognized as drive A.
The floppy disk drive in the optional docking station connected to the notebook is not recognized as drive A
To set the docking station floppy disk drive to A, proceed as follows :
1
Turn the system power off and disconnect all peripherals.
2
Connect the docking station, then turn the system power on.
3
Select
Control Panel
from the
Start
menu.
4
Double-click
System
.
5
Select the
Hardware
tab, then click
Device Manager
.
6
Select
Floppy disk controllers
, then
Standard floppy disk controller
.
7
Select
Operation
, then
Delete
.
