Sony PCG-FRV35 - VAIO - Pentium 4 2.66 GHz User Manual Download Page 17

Page: 17 / 141

Notes on batteries



Never leave the battery in temperatures above 140°F (60°C), such as under direct sunlight or in a car parked in the
sun.



While the battery is in use or being discharged, the battery heats up. This is normal and is not cause for concern.



Keep the battery away from all sources of heat.



Keep the battery dry.



Do not open or disassemble the battery.



Do not expose the battery to any mechanical shock.



Battery life is shorter in a cold environment because of decreased battery efficiency at low temperatures.

Page 17

Summary of Contents for PCG-FRV35 - VAIO - Pentium 4 2.66 GHz














































































































































Search results

Summary of Contents for PCG-FRV35 - VAIO - Pentium 4 2.66 GHz

Reviews:

Related manuals for PCG-FRV35 - VAIO - Pentium 4 2.66 GHz

Brands by name

Popular brands

Sony PCG-FRV35 - VAIO - Pentium 4 2.66 GHz, User Manual

Search results

Summary of Contents for PCG-FRV35 - VAIO - Pentium 4 2.66 GHz

Reviews:

Related manuals for PCG-FRV35 - VAIO - Pentium 4 2.66 GHz

Brands by name

Popular brands