Sony PCG-FRV25 VAIO User Guide (primary manual) User Manual Download Page 84

Page: 84 / 124

Disconnecting a floppy disk drive

You can disconnect a USB floppy disk drive when the computer is on or off. Disconnecting the drive when the computer is in
a power saving mode (Standby or Hibernate) may cause the computer to malfunction.

To disconnect the drive while the computer is on

Double-click the

Safely Remove Hardware

icon

on the taskbar. The

Safely Remove Hardware

dialog box

appears.

Click to select the floppy drive

in the Hardware devices window, if it is not already selected

Click

Stop

. The

Stop a Hardware device

window appears.

Make sure the floppy drive is selected, and click

OK.

A message appears, stating it is safe to remove the

hardware device.

Page 84

Summary of Contents for PCG-FRV25 VAIO User Guide (primary manual)





























































































































Search results

Summary of Contents for PCG-FRV25 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-FRV25 VAIO User Guide (primary manual)

Brands by name

Popular brands

Sony PCG-FRV25 VAIO User Guide (primary manual), User Manual

Search results

Summary of Contents for PCG-FRV25 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-FRV25 VAIO User Guide (primary manual)

Brands by name

Popular brands