Sony PCG-FRV25 VAIO User Guide (primary manual) User Manual Download Page 7

Page: 7 / 124

Inserting a battery

To insert a battery

Push the battery bay cover down to open it. The battery bay cover swings out but does not detach from the
computer.

Opening the Battery Bay

Slide the battery into the battery bay. If the computer is on, it automatically detects the battery.

Inserting a Battery

Push the battery bay cover up until it clicks into place.

Some programs and peripheral devices prevent the system from automatically entering Hibernate mode. If you are using
battery power, save your data frequently to avoid data loss and manually activate a power saving mode. See

Using power

saving modes

for more information.

Page 7

Summary of Contents for PCG-FRV25 VAIO User Guide (primary manual)





























































































































Search results

Summary of Contents for PCG-FRV25 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-FRV25 VAIO User Guide (primary manual)

Brands by name

Popular brands

Sony PCG-FRV25 VAIO User Guide (primary manual), User Manual

Search results

Summary of Contents for PCG-FRV25 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-FRV25 VAIO User Guide (primary manual)

Brands by name

Popular brands