manualshive.com logo in svg

Sony PCG-FRV25 VAIO User Guide (primary manual), User Manual, Page: 56 / 124

Share
Download
Sony PCG-FRV25 VAIO User Guide (primary manual) User Manual Download Page 56

Describing the touch pad 

  Locating the Touch Pad 

Touch Pad Action 

Description 

Sliding one finger 

Equivalent to using a mouse to place the pointer on an item. 

Tapping once 

Equivalent to pressing the left button once. 

Tapping twice 

Equivalent to pressing the left button twice. 

Sliding one finger while pressing the left button 

Equivalent to using the mouse to drag an item. 

Moving your finger along the right edge of the touch pad 

Equivalent to scrolling vertically. (The scroll function is available

only with programs that support a touch pad scroll feature.) 

Moving your finger along the bottom to scroll horizontally 

Equivalent to scrolling horizontally. (The scroll function is

available only with programs that support a touch pad scroll feature.) 

Page  56

Summary of Contents for PCG-FRV25 VAIO User Guide (primary manual)





























































































































Reviews:

No comments