Sony OXF-R3, Brochure & Specs

Page: 29 / 34

25
Channel Equaliser and Filters
SECTION GAIN FREQUENCY Q/SLOPE OVERSHOOT
LF Filter -6 dB steps 20 to 200 Hz 0 to 36 dB/Oct –
LF Peak/Shelf ±20 dB 20 to 400 Hz 0.5 to 16 0 to 50% (Q adjust:Shelf)
LMF ±20 dB 30 to 600 Hz 0.5 to 16 –
MF ±20 dB 100 Hz to 6 kHz 0.5 to 16 –
HMF ±20 dB 600 Hz to 18 kHz 0.5 to 16 –
HF Peak/Shelf ±20 dB 2 to 20 kHz 0.5 to 16 0 to 50% (Q adjust:Shelf)
HF Filter -6 dB steps 2 to 20 kHz 6 to 36 dB/Oct –
Dynamics Gain Reduction:
All levels in this table are referenced to full scale and time constants apply
to a 10 dB gain change. The time constant marked * denotes a calculated
value for 10 dB gain change since the true figure is 40 dB gain change in
20.8 µs (1 sample).
Dynamics Side-Chain EQ: 2-band side-chain EQ can be inserted into
■
the Dynamics Side-Chain alone
■
the Signal Path alone
■ both the Side-Chain and the Signal Path
SECTION GAIN FREQUENCY Q/SLOPE
LF Peak ±20 dB 20 Hz to 1 kHz 0.5 to 16
HF Peak ±20 dB 500 Hz to 20 kHz 0.5 to 16
DMSK-R3001 – GML 8200 Emulation Software
SECTION GAIN FREQUENCY Q/SLOPE
LF Peak/Shelf ± 20 dB 15 to 800 Hz 0.4 to 10
LMF ± 20 dB 16 to 800 Hz 0.4 to 10
MF ± 20 dB 120 Hz to 8 kHz 0.4 to 10
HMF ± 20 dB 400 Hz to 26 kHz* 0.1 to 10
HF Peak/Shelf ± 20 dB 400 Hz to 26 kHz* 0.4 to 10
*simulated
Dynamics
SECTION THRESHOLD RATIO/RANGE ATTACK HOLD RELEASE
Gate -80 to 0 dB 0 to -80 dB 5 µs* to 26 ms 10 ms to 10 s 7.8 to 519 ms
Expander -60 to 0 dB 1:1 to 1:16,
0 to -80 dB 260 µs to 104 ms 10 ms to 20 s 5.2 to 519 ms
Limiter -60 to 0 dB 1:1 to 1000:1 519 µs to 52 ms 10 ms to 30 s 52 ms to 3.1 s
Compressor -20 to 0 dB – 100 µs to 500 ms 50 ms to 30 s 100 ms to 10 s
GAIN MAKE-UP SOFT CURVES
Compressor 0 to 24 dB 5 dB, 10 dB, 15 dB, 20 dB across Threshold