2-25 (E)
NSS-V2
4
Setting the Global Ethernet gateway
Set the gateway for the Global Ethernet. If you want to connect to the network other than those
having the same three higher order bytes in their IP addresses (192.168.1.*, in the above example),
set it by following the instructions by the network administrator. It is not required to set this setting if
you do not connect to such a network.
Example:
Type your Global gateway (CurrentSetting : )
(None)
5
Setting the name server for the Global Ethernet
Set the address of the name server for the Global Ethernet. You need not set this setting if you
connect using the IP address for the Global Ethernet that has been set with Transfer Manager. Set this
setting if you connect using the host name that will be set below. Follow the instructions by the
network administrator to set this setting.
Example:
Type your Global nameserver (CurrentSetting : )
(None)
6
Setting the host name for the Global Ethernet
Set the host name for the Global Ethernet. If you have set the name server for the Global Ethernet,
enter the host name that has been registered. Otherwise, set any name that is different from other
network devices.
Example:
Type your HostName (CurrentSetting : TM1)
TM-MediaVenue1
When the entry of the host name for the Global Ethernet is completed, the confirmation screen
appears as shown below.
Example:
Transfer Manager Number: 1
Local IP Address: 192.168.0.10
Local NetMask: 255.255.255.0
Local gateway:
Local Nameserver:
Global IP Address: 192.168.1.10
Global NetMask: 255.255.255.0
Global gateway:
Global Nameserver:
Host Name: TM-MediaVenue1
OK? [y/n]
In the above example, default values are used for the gateway address and the name server address, so
that nothings are set for these items.
