2-23 (E)
NSS-V2
Setting item
This article describes items that are set by inputting during installation and those that are set by the
Installer.
Items that should be input during installation are those related to the network such as the IP address.
Items that should be set are listed below.
.
Settings for the Local Ethernet (to be used for the communication with the File Manger I/O Box, i.e.
the settings of eth0)
The setting values for the Local Ethernet are automatically set by setting the Transfer Manager Num-
ber.
Normally, following values are set by setting the Transfer Manager Number to 1.
Item
Default value
Remark
IP Address
192.168.0.10
Net Mask
255.255.255.0
Gateway Address
None
Name Server Address
None
.
Settings for the Global Ethernet (to be used for sending/receiving MXF files, i.e. the settings of eth1)
You are prompted to enter the value for each item. Default values are listed below.
Item
Default value
Remark
IP Address
192.168.1.10
Required item (Should be edited according to the environ-
ment. Setting values, however, must be the same as those
that have been set using the Setup Tool.)
Net Mask
255.255.255.0
Required item (Should be edited according to the environ-
ment. Setting values, however, must be the same as those
that have been set using the Setup Tool.)
Gateway Address
None
Optional
Name Server Address
None
Optional
.
Setting of the host name
You are prompted to enter the value. The default value is listed below.
Items
Default value
Remark
Host Name
TM1
Cannot be omitted
The Installer automatically registers the user.
The user names and passwords used by the Installer in the automatic setup (registration) are listed below.
User name
Password
Home directory
Remark
root
mediavenue
/root
_
netif
netif
/mnt/egfs
User for connecting to the FTP
mediavenue
mediavenue
/usr/local/netif/update
User for updating NetIF FTP
reboot
No Password
/usr/local/netif
User for restarting the OS
shutdown
No Password
/sbin
User for stopping the OS